Upgrade 0-10V Lighting with New Kind of PIR Sensor, Built-In DALI Contro...

Upgrade Your 0-10V Lighting with New Kind of PIR Sensor with Built-In DALI Control — LSP-D207-Z18 . Take a look the video demo its performance when control by a remote control.

Tired of complicated upgrades to add smart control to 0-10V systems?
Meet the LSP-D207-Z18 PIR Sensor — the all-in-one solution for modern, energy-efficient lighting in commercial, industrial, and outdoor applications.

✅ Built-in DALI Control Unit – Enables remote DALI commands for 0-10V dimming, no extra hardware needed.
✅ Zhaga Book 18 Plug & Play – Installs in seconds on high bays, shoeboxes, wall packs & more.
✅ Dual Sensing – Motion detection + daylight harvesting for automatic energy savings.
✅ Wide Coverage – Up to 16m diameter range, mountable up to 10m high.
✅ Rugged & Reliable – IP65 rating, perfect for indoor or outdoor use.

Whether you’re retrofitting or specifying new projects, this sensor brings smart lighting control within easy reach — reducing install time and boosting ROI through energy savings.

Perfect for: Warehouses, parking lots, industrial facilities, pathways, and public spaces.

hashtag

New Kind of PIR Sensor Integrated with DALI Control, #LSP-D207-Z18.

Tired of complicated upgrades to add smart control to 0-10V systems? Meet the LSP-D207-Z18 PIR Sensor — the all-in-one solution for modern, energy-efficient lighting in commercial, industrial, and outdoor applications. ✅ Built-in DALI Control Unit – Enables remote DALI commands for 0-10V dimming, no extra hardware needed. ✅ Zhaga Book 18 Plug & Play – Installs in seconds on high bays, shoeboxes, wall packs & more. ✅ Dual Sensing – Motion detection + daylight harvesting for automatic energy savings. ✅ Wide Coverage – Up to 16m diameter range, mountable up to 10m high. ✅ Rugged & Reliable – IP65 rating, perfect for indoor or outdoor use. Whether you’re retrofitting or specifying new projects, this sensor brings smart lighting control within easy reach — reducing install time and boosting ROI through energy savings. Perfect for: Warehouses, parking lots, industrial facilities, pathways, and public spaces. #LightingControl #SmartLighting #DALI #PIRSensor #EnergyEfficiency #CommercialLighting #IoT #BuildingAutomation #ElectricalContractor #LightingDesign #LSP-D207-Z18

New dimming converter, 0-10V to DALI broadcast test with 0 10V passive d...

The new dimming converter(Model#CU-A2D-FME) is a protocol converter designed to bridge traditional 0-10V dimming controls with modern DALI lighting system. It allows users to employ a standard 0-10V dimming knob or slider to control DALI LED drivers that are already installed, providing a simple, wired solution without the need for a dedicated DALI controller or app.

Its key features & benefits:
· Solves Compatibility Issues: Enables the use of a familiar 0-10V dimmer on-site to control existing DALI LED drivers.
· Standards Compliant: Compatible with the IEC 62386-101 standard for DALI devices.
· Customizable: Power-on broadcast commands can be customized. The dimming curve (logarithmic or linear) can be set, with logarithmic as the default.
· Energy Efficient: Low operational current (28-32mA) and very low standby current (~3.0mA).
· Robust Design:
· IP67 rating for dust and water resistance.
· Wide operating temperature range (-20℃ to +70℃).
· Accommodates wire covers from 5mm to 8mm in diameter.
· Simple Integration: Powered directly from the DALI bus power supply (PS).
· Versatile: One SKU supports multiple fixture types, dimming systems, and is compatible with various popular LED engines and troffers.
· Long-Term Reliability: Backed by a 5-year warranty.

Typical Application Scenario:
In a lighting system where DALI LED drivers are installed,but the user prefers or requires a physical, wired 0-10V dimmer for local control instead of a digital interface (like an app or DALI controller), this converter seamlessly translates the 0-10V signal into DALI broadcast commands for dimming control.


hashtag

New DALI converter, from 0-10V dimming input to DALI broadcast commands,...

It is thrilling to unveil our new CU bridge, it is a converter from 0-10V dimming input to DALI broadcast commands (A → D) , when the DALI LED driver exist in the lighting system, but want to use a 0-10V dimmer on-site to dim the lights, this converter can solve this problem.

Please kindly see below features:
It is compatible with IEC 62386-101
Power on broadcast commands can be customized
Logarithmic or linear dimming curve can be set (default logarithmic)
Operation current 28 - 32mA ,Standby current is as low as 3.0mA
Suitable for outer diameter of wire cover from 5mm to 8mm
IP67 ingress protection rating
Operation temperature: -20℃ to +70℃
Suitable for 0-10V dimmer to control DALI LED driver
One SKU supports multiple fixture types and dimming systems
Current states available to a variety of popular LED engines
Can be used for a variety of lighting fixture and troffers
Powered by DALI bus PS
Warranty 5years

hashtag